V-Guard Gas Geyser 5L Safeflo Plus review: We all know why we use geysers, nut when it comes to buying one, it doesn’t go that comfortable because of its various kinds. There are electric models, gas, diesel models, and all carry their own baskets of advantages and disadvantages.
Comparison of these types is pretty long, which we will do later, but currently, let’s describe what we did in testing.
For our Best Geysers Review, we tested 46 geysers for 317 hours, and in under 5000 rupees category, this geyser from V-Guard was truly unbeatable.
V-Guard Gas Geyser Price is 5100 now (might change with time), and for this price, features like Overheat protection, Automated ignition, Copper heat exchanger, SS Burners, etc. prove to be more than enough.
Let’s know more about this 6L model and why it is currently the best in India!
- V-Guard Gas Geyser 5L Safeflo Plus Review
- V-Guard Gas Geyser 5L Safeflo Plus review: REPORT CARD
V-Guard Gas Geyser 5L Safeflo Plus Review
Searching for a fully dependable heater to enjoy water Tub in Frightening Winter seasons or chilling days that are cool? Then safefloplus gasoline geyser from V-guard should be your top selection. Following are the reasons:
This high-quality gas water heater has a solid build layout. Water heater internally has a tank Employing an LPG gas and is suitable for small families. The design of this geyser beautifies your bathroom without seeming like a device stick to the walls. This geyser measures 500 x 400 x 250 mm and is sleek enough. Installation is also very easy.
Easy to Operate
The water heater’s side contains 3 control knobs — flame Control (low/high), burner selector (winter/summer), water leak (min/max) along with also a power switch to turn the heater on/off as per your selection. It’s possible to operate them by rotating in instructions and over-pressurization. The water heated by this geyser may be used to wash dishes, clothes, and other household chores.
Its user-friendly mechanism arrives with an automated ignition system. The ignition system includes a minute hydroelectric generator module linking an inlet pipe for producing electricity by water flow passing through its inlet pipe and the geyser itself.
This water heater utilizes an ignition for sparking and opening a gas valve to permit gas in so as to heat up water. This kind of ignition and gas valve are highly dependable.
Copper heat exchanger
Heat exchangers transfer heat to achieve heating or cooling as pr need. An important design characteristic of heat exchanger technology is the choice of appropriate materials in order to conduct and transfer heat rapidly and efficiently.
Copper has several desirable properties for thermally efficient and highly durable heat exchangers. Firstly, copper is an awesome conductor of heat, meaning that copper’s high thermal conductivity permits heat to pass through it rapidly.
As a result, due to this Copper heat exchanger, the V-Guard Gas Geyser 5L Safeflo Plus model heat water rapidly and also proves to be durable and consistent.
How does a gas water heater work?
To explain to you how actually a water heater works, we’ve divided the whole process into a few parts.
A flow sensor detects the heating process, and the flow starts when a hot water faucet is turned on by you anywhere in your house. Don’t worry, and a slow leaking tap isn’t enough to start the unit. Some versions have a combustion fan that pulls in the air for the combustion process.
At the exact same time, the ECU activates the igniter and starts the stream of gas. The igniter sparks until a flame is detected by the fire sensor. In case the unit fails to light in a few seconds, the gas leak shuts down to prevent any unsafe accumulation of gas.
Heating the Water
The gas burner pushes heat to the heat exchanger, through which the water passes. This water’s length is a pattern, permitting the water to absorb as much heat from this heat exchanger’s walls. Some versions have a secondary heat exchanger using the heat from the burner exhaust gases.
This type of continuous flow hot water heater can be referred to as a”condensing” version. The advantage is that they provide greater energy efficiency. nevertheless, the price is somwhat more than the typical models. Even many versions are better or rated.
Controlling the Temperature
Most units come with their temperature pre-set in the factory. This is a security precaution to help prevent scalding. 50°C is typical for residential uses. As temperature and the flow speed of the water may vary, the ECU modulates the total amount of gas that gets pushed to the burner, turning it up/down, as needed.
This modulation of the burner and gas strength is what keeps the water at a fixed temperature. This relies on the exit side of the heat exchanger from a water temperature sensor on input. Some continuous flow methods have temperature controls that allow the user to pick a temperature lesser than the factory pre-set point.
These controls can be found on the device, wired into a distant location — like a kitchen or bathroom — or perhaps wireless (see picture ). The ECU accepts the input from this geyser’s controller to modulate the gas flow and burner intensity, keeping the water.
To power the igniter that was sparking, so as to ignite the gas, most flow units are connected to the energy source of your home. But, there are a number of components that use the energy created by the water flowing through a small water turbine to give the power for ignition (see graphic). Lastly, there are also some units that simply use a very simple battery.
The turbine and battery have a distinct advantage over the versions, inasmuch as they can function during a power outage. This turbine-powered type’s drawback is that the entire unit is larger than a similar model that is plug-in, as well as more expensive.
The best way to Tankless Water Heater Works — Summary
- Coldwater flows to the water heater when you open the hot water faucet within your home.
- The water leak is detected by a sensor that ignites the gas burner to warm the water from the heat exchanger.
- The water usually follows a serpentine pattern through the heat exchanger, absorbing as much warmth as possible.
- An electronic control device modulates the gas burner to keep up a set water temperature.
V-Guard Gas Geyser 5L Safeflo Plus review: REPORT CARD